User's Manual

RB8762 Designer’s Guide_draft v04 3
Introduction
Thank you for choosing Radicom RB8762 Module. We are committed to providing you
quality service and technical support. The RB8762 modules are designed to meet OEM’s
needs of embedding low power, wireless data connectivity to their products. The RB8762
family offers a quick and simple solution for wireless Bluetooth communications.
The Radicom RB8762 module is designed to meet the emerging market for Bluetooth 4.2
applications. These embedded Bluetooth 4.2 modules integrate entire profiles, applications,
and Bluetooth protocol stack, so no external processor is needed. The module contains an
internal S-Flash so custom parameters and settings can be easily loaded into these modules.
The RB8762 can be factory configured for other Bluetooth cost-effective and power-efficient
wireless consumer products such as watches, medical sensors, mice, TV remote controls and
fitness trainers. Contact Radicom for help to add the BLE Data Protocol functionality to your
4.0 Bluetooth device or for help in determining which Bluetooth Module is the best fit for
your particular Bluetooth application.
The RB8762 family modules can be powered with standard 3V3 low power. In lowest mode
it consumes only uA level power and will wake up in few hundred microseconds. The
RB8762 family provides superior performance in the presence of interference from 802.11
(WiFi) wireless devices and other 2.4GHz radios.
The RB8762 modules support quick connections and data transfers allowing an application
to establish a Bluetooth connection within a few milliseconds for short communication bursts
before quickly disconnecting the Bluetooth connection to save power. It takes much less
time to make a connection than conventional Bluetooth wireless technology and consumes
approximately only 1/20
th
of the power of Bluetooth Basic Rate.
The RB8762 is available in surface mount (SMD) or through-hole (Dip) hardware designs.
The RB8762 module is the surface mount model. The RB8762 can also mounted on a
conversion board to create the RB8762HM model for serial through-hole designs.