Specifications

7
107
7 Yamaha DM2000
Requirements
You need
• a DM2000 or compatible product
• Logic Pro 7 or newer
Set Up
• Make sure that an XSKey with a Logic Pro 7 authorization is connected.
• Make sure that your DM2000 unit(s) are connected with the computer via USB.
• Make sure that the MIDI driver which comes with the unit is installed.
At DM2000 Front Panel
Basically you set up the DM2000 as if you are using it with Pro Tools. See the DM2000
user manual, section 19. Here are the necessary steps:
• Press DISPLAY ACCESS [SETUP], then [F4] (below the LCD). Now move the cursor to the
port parameters right to DAW, select USB and right to it 1-3.
• Press DISPLAY ACCESS [REMOTE], then [F1] (below the LCD). For the TARGET parameter,
choose ProTools.
• Press LAYER [REMOTE 1]
In Logic
When Logic Pro is launched, the unit is installed automatically. You should now see
three DM2000 icons in the setup window, aligned horizontally.