Specifications

Chapter 8 Yamaha DM1000 119
AUX SELECT Section
ENCODER MODE Section
FADER MODE Section
Control Assignment
AUX 1 assigns Send 1 Level to Encoders, and Send 1 to 4 Levels to DSP Encoders.
While held down, the Channel Strip displays show the current Send 1
destination assignment
DAW SHIFT/ADD as above, but Send 6
AUX 2 assigns Send 2 Level to Encoders, and Send 1 to 4 Levels to DSP Encoders.
While held down, the Channel Strip displays show the current Send 2
destination assignment
DAW SHIFT/ADD as above, but Send 7
AUX 3 assigns Send 3 Level to Encoders, and Send 1 to 4 Levels to DSP Encoders.
While held down, the Channel Strip displays show the current Send 3
destination assignment
DAW SHIFT/ADD as above, but Send 8
AUX 4 assigns Send 4 Level to Encoders, and Send 1 to 4 Levels to DSP Encoders.
While held down, the Channel Strip displays show the current Send 4
destination assignment
AUX 5 assigns Send 5 Level to Encoders, and Send 5 to 8 Levels to DSP Encoders.
While held down, the Channel Strip displays show the current Send 5
destination assignment
AUX 6 toggles Encoder Push-Switch buttons between normal behavior and setting
default value
AUX 8 determines mode of channel strip SEL buttons while channel strip AUTO
button is off:
• indicator off: track selection
• indicator on: Insert selection
Control Assignment
PAN assigns Pan to Encoders; assigns selected track’s pan/surround parameters
to DSP Encoders
AUX assigns Send 1 Level to Encoders, and Send 1 to 4 Levels to DSP Encoders.
While held down, the Channel Strip displays show the current Send 1
destination assignment
Control Assignment
FADER MODE toggles Flip mode