Specifications

11
139
11 CM Labs Motormix
Requirements
You need
• one or more CM Automation (or CM Labs) Motormix
• Logic Pro 7 or newer
Set Up
• Make sure that your Motormix unit(s) are connected in both directions with the MIDI
interface.
• Choose menu item Logic Pro > Preferences > Control Surfaces > Setup…
• Choose menu item New > Install… from the Setup window’s local menu
• For every Motormix unit, select “Motormix” in the Install window, choose “Add”, then
set the appropriate MIDI In and Out ports in the Setup window.
Assignment Overview
A right-aligned modifier button below a button description means: while holding
down this modifier, the button has this alternate meaning.
VIEW Section
Control Assignment
Left/right
buttons
In Plug-in and Instrument Edit mode: shifts the parameter bank by one bank
Otherwise:
if BANK LED is off:
• shifts the fader bank by one channel
if BANK LED is on:
• shifts the fader bank by one bank
SHIFT In Plug-in and Instrument Edit mode: shifts the parameter bank by one parameter
In Group Edit mode, the group parameter bank is shifted
bank toggles mode of left/right buttons (see above)
SHIFT sets Select buttons to Track View Select mode (see below)