Specifications

Chapter 11 CM Labs Motormix 145
Left Function Buttons
Faders
The faders normally control Volume, except when in Flip Mode, where they duplicate
the Rotary Encoders.
Control Assignment
AUTO ENBL/mode currently unassigned
SHIFT switches rotary encoders to automation enable mode
SUSPEND/create While held down, the group clutch is engaged, i.e. groups are disabled
SHIFT creates a new group and goes to Group Edit view
PLUG-IN/compare switches Rotary encoders and Multi buttons to Plug-in Assign mode. The
Rotary Select knob then selects the insert to edit.
In Plug-in Assign or Instrument Assign mode, switches back to Pan.
In Plug-in Edit mode, switches back to Plug-in Assign mode.
in Instrument Edit mode, switches back to Instrument Assign mode.
SHIFT switches Rotary encoders and Multi buttons to Instrument Assign mode.
WINDOW/tools switches Select Switches to Window select mode
SHIFT switches Select Switches to Select Tool mode
ALL/alt/fine while ALL/ALT/FINE is held down, rotary encoders are in full mode: rotating
counterclockwise sets minimum, rotating clockwise sets maximum
SHIFT while SHIFT and ALL/ALT/FINE are held down, rotary encoders are in fine
mode
DEFAULT/bypass currently unassigned
SHIFT in instrument edit mode: toggles bypass of the instrument
in plug-in edit mode: toggles bypass of the currently edited plug-in
UNDO/disk performs an Undo step. The LED is on if there is a Redo step available.
SHIFT saves the song. The LED is on if the song must be saved
SHIFT switches to Shift mode—then the lower case inverted labels below the
buttons apply