Specifications

12
147
12 Radikal Technologies SAC-2K
Requirements
You need
• an SAC-2K or SAC-2.2
• Logic Pro 7 or newer
Set Up
• Make sure that an XSKey with a Logic Pro 7 authorization.
• Make sure that your SAC-2K unit(s) are connected bidirectionally with the computer,
either using a MIDI interface or the USB connector built-in to the unit.
• If the unit(s) are connected via USB, make sure that the MIDI driver which comes with
the unit is installed.
• Choose menu item Logic Pro > Control Surfaces > Setup…
• Choose menu item New > Install… in the Setup window’s local menu
• Select the SAC-2K in the install list
• Click the Scan button.
Logic should now scan for and install the SAC-2K automatically.
Assignment Overview
A right-aligned modifier button below a button description means: while holding
down this modifier, the button has this alternate meaning.
LCDs and Encoders
Control Assignment
Left and middle LCDs Upper row displays track number (if in a multi channel view) or parameter
name (if in a channel strip view)
Lower row displays parameter value of Encoder below.
At the right, level meters are displayed.
Right LCD Upper row displays name of parameter edited by Encoder below.
Lower row displays parameter value of Encoder below.
At the very right, a level meter of the Master Output is displayed.