Specifications

Chapter 12 Radikal Technologies SAC-2K 149
Mixer-Mode Section
Control Assignment
Pan switches to multi-channel Pan editing.
Encoders 9 to 12 edit Pan/Angle, Diversity, LFE and Surround Mode of
selected track
High, HiMid, LowMid,
Low
switches to multi-channel Gain editing of a certain EQ band. Encoders 9 to
12 edit frequency, gain, Q factor and on/off of the selected track.
Pressing and releasing the button chooses a certain band, depending
whether the song uses the old or new EQ.
Old EQ:
Low: band 3
LowMid: band 4
HiMid:
High:
New Channel EQ:
Low: band 3 (first parametric EQ band)
LowMid: band 4 (second parametric EQ band)
HiMid: band 5 (third parametric EQ band)
High: band 6 (fourth parametric EQ band)
While held down, Encoder 9 lets you choose the EQ band to edit (old
EQ: bands 1 to 4; new EQ; bands 1 to 8)
The buttons LED is on when in multi-channel Gain editing mode of the
buttons EQ band.
Snd/Ins toggles the four Snd/Ins 1 to 4 buttons between Send and Insert mode.
LED off: Send mode
LED on: Insert mode
Snd/Ins 1 to 4
If in Send mode, switchs to multi-channel Send Level editing of Send 1 to
4
Encoders 9 to 12 edit Destination, Level, Pre/Post and Mute of the selected
track. Destination must be confirmed by Encoder 10’s push-button.
While held down, Encoder 9 lets you choose the desired Send number (1 to
8)
The buttons LED is on when in multi-channel Send Level editing mode of
the buttons Send number.
If in Insert mode, switchs to multi-channel insert plug-in selection of Insert
1 to 4. A plug-in must be confirmed by the Encoder’s push-button.
While held down, Encoder 9 lets you choose the desired Insert number (1 to
15 )
The buttons LED is on when in plug-in selection mode of the button’s insert
number.
Audio switches to Global View and displays Audio tracks
SHIFT switches to Mixer View
MIDI switches to Global View and displays MIDI tracks
SHIFT switches to Arrange View
Input switches to Global View and displays Audio Inputs
SHIFT switches to Global View and displays Audio Outputs and Master