Specifications

13
155
13 Roland SI-24
Requirements
You need
• a Roland SI-24
• Logic Pro 7 or Express 7, or newer
Set Up
• Make sure that your SI-24 unit(s) are connected to the RPC card using the included
blue cable. This connector provides both digital audio and MIDI connections.
• Make sure that the MIDI driver which comes with the unit is installed.
• Choose menu item Logic Pro > Preferences > Control Surfaces > Setup…
• Choose menu item New > Scan all models… in the Setup window’s local menu
Assignment Overview
A right-aligned modifier button below a button description means: while holding
down this modifier, the button has this alternate meaning.
Channel Strips
Control Assignment
EQ ON/OFF 1
to 4
in Pan mode:
• toggles bypass of EQ band 1–4
• enters EQ/SEND mode
in EQ/Send mode:
• toggles bypass of EQ band 1–4
• The button LED is on if the EQ is enabled
in Plug-in mode:
• switches to insert 1–4
• One of the buttons’ LED is on which displays the selected insert
• If a Plug-in editor window is open, it will also switch to the selected insert
SHIFT in EQ/Send mode: toggles Send 1–4 Mute
EQ/SEND toggles track edit section between
• EQ/Send mode (LED on)
• Pan mode (LED off)