Specifications

14
161
14 Tascam US-428
Requirements
You need
• a US-428 or US-224
• Logic Pro 7 or Logic Express 7, or newer
Set Up
Make sure that your US-428/224 unit(s) are connected via USB with the computer. They
are installed automatically.
Assignment Overview
A right-aligned modifier button below a button description means: while holding
down this modifier, the button has this alternate meaning.
Note for US-224 users: there are only four channel strips, and the EQ section, as well
the Master section (except the NULL button and data wheel) are not available.
Channel Strips
Control Assignment
MUTE 1 to 8 SOLO LED off: toggles Mute; LED displays Mute status
SOLO LED on: toggles Solo; LED displays Solo status
REC 1 to 8 LEDs displays Record Ready status.
NULL on if fader is higher than actual volume
SELECT 1 to 8 LEDs displays Select status.
NULL on if fader is lower than actual volume
SELECT 1 to 8
buttons
selects track
REC toggles Record Ready status
Fader 1 to 8 controls volume
NULL lets you update the fader position to match the actual volume
Master Fader controls master volume