Specifications

Appendix B Logic Control—MIDI Implementation 171
Online Mode:
Once the connection between Logic Control and the host software has been made,
Logic Control stays in Online Mode until it receives a Go Offline message.
Firmware version request
Received:
<Hdr> 13 00 F7 Version request
Transmitted:
<Hdr> 14 vv vv vv vv vv F7 Version reply
vv 5 ASCII bytes containing version string, e.g. “V1.0”.
Note: When Logic Control receives a version request message, it sends the version
reply message
Reset Messages
Received:
<Hdr> 61 F7 Faders to minimum
(Sends all faders to the bottom of their throw)
<Hdr> 62 F7 All LEDs off
(Turns off all LEDs on Logic Control)
<Hdr> 63 F7 Reset
(Re-Boots Logic Control into Offline mode)
Transmitted: No
Configuration Messages
Received:
<Hdr> 0A tt F7 Transport button click
<Hdr> 0B ll F7 LCD back light saver
<Hdr> 0C mm F7 Touchless movable faders
<Hdr> 0E ii ss F7 Fader touch sensitivity
Transmitted: No
tt 00 = no transport button click
01 = transport button click (default)
ll 00 = LCD back light off
01 to 7F = LCD back light on, with time out in minutes (default: 0F = 15
minutes)
mm 00 = fader movements are only transmitted if the fader has been recognized
as touched
01 = fader movements are also transmitted if the fader has not been recog-
nized as touched (e.g. with finger nail or pen)
ii Fader ID (00 thru 07; Master = 08)
ss Fader touch sensitivity (00 to 05; default: 03)