Specifications

Chapter 2 Logic Control—Details 29
• Series of connected LED segments, starting in the center position and fanning to the
left AND right (e. g. Q-Factor)
• An LED dot below the V-POT indicates when the parameter value is in the centered/
default position
Holding down the C/ALT button sets the V-POTs to high resolution parameter
adjustment mode, where applicable.
Holding down the OPTION button toggles the V-POT between the minimum/maximum
parameter value.
Rec/Rdy (Record/Ready) Switch
This switch arms or disables the channel for recording. Each channel features an
independent Rec/Rdy LED which illuminates when a track is “armed” for recording.
Holding down the OPTION button, while pressing any REC/RDY button will disarm all
tracks.
In Global View, if you arm an audio channel which is currently not used by any track in
the song, and then start recording, you will be asked if you want to create a new track
with this audio channel in the current recording folder.
Signal LED
Indicates the presence of any outgoing MIDI or audio signal. When recording, the
presence of an incoming signal will be indicated.
Solo Switch
For isolating a channel’s signal. Each channel features an independent Solo LED which
illuminates when a track is soloed. The Rude Solo LED—just to the right of the Position/
Time Display LED—also illuminates whenever any track is soloed.