Specifications

30 Chapter 2 Logic Control—Details
Holding down the OPTION button, while pressing any SOLO button will disable solo for
all tracks.
In the “Send Destination/Level” views (see the Send Assignment Modes section, from
page 39 onwards), the SOLO button controls the Pre/Post mode selection—in both
Multi Channel and Channel Strip views.
Mute Switch
Used to defeat the track’s signal. Each channel features an independent Mute LED
which illuminates when a track is muted.
Holding down the OPTION button, while pressing any MUTE button will unmute all
tracks.
In the “EQ Frequency/Gain” and “Send Destination/Level” views, the MUTE button
controls the EQ bypass or Send mute function. This affects both Multi Channel and
Channel Strip views.
Select Switch
This switch is used to select a channel for channel-based editing or assignment
commands. Each channel features an independent SELECT LED which illuminates when
a track is selected.
When holding down the SHIFT button, pressing any channel SELECT button will set the
track’s volume to unity level (0 dB).
While holding down SHIFT, a SELECT button’s LED indicates if the track’s volume is set
to 0 dB.
When holding down the OPTION button, pressing any channel SELECT button will create
a new track with the same instrument of the selected track and switch to Arrange View.
When holding down the SHIFT and OPTION buttons, pressing any channel SELECT
button will create a new track with the next instrument of the selected track and
switch to Arrange View.