Specifications

Chapter 2 Logic Control—Details 31
Touch-Sensitive Motor Fader
These 100mm faders are for controlling the channel’s levels. They transmit 1,024
discrete “steps” as a 10 Bit value, making their use very smooth. When FLIP is activated,
the parameter currently assigned to the V-POT can be controlled with the fader. This
allows you to more easily control pans, aux returns, MIDI track parameters, EQs, Plug-in,
Audio Instrument or other channel parameter levels/values. Please see the Logic
Reference Manual for further information. The eight faders move relative to the activity
of the currently chosen Bank of on-screen faders. The Fader Bank is shifted when one of
the FADER BANK buttons is pressed.
Fader Behavior in Other Modes
• In Flip mode: duplicates or swaps with V-POT of same channel.
• In Surround Angle/Diversity View: adjust surround diversity
• In EQ Frequency/Gain View: adjust gain of selected EQ band
• In Send Destination/Level Multi Channel View: adjust send level of selected send
• In Send Destination/Level Channel Strip View: adjust send level of send on selected
track
The Assignment Zone
The small light gray area just below the Mode Display contains six buttons.
These ASSIGNMENT buttons work in both Track and Global View modes. View modes are
discussed in View Modes section, from page 17 onwards.