Specifications
Chapter 2
Logic Control—Details
37
•
turning a
V-POT
changes the
surround X
value
(
or adjusts
pan position
on non-
surround tracks)
•
pressing a
V-SELECT
sets
surround X
to its default
•
the faders edit surround
surround Y
Notes on Surround X/Y editing
X and Y have the value range
−
1000 to
+
1000, however the resolution is not that high,
as surround positions are currently recorded in 7 bit only.
Note that X and Y act in a rectangular coordinate system. So value pairs outside the
surround circle are not possible.
When trying to set a value which would lead to an invalid position, the other
coordinate is automatically adjusted to a valid position, e.g. moving Y to
+
1000 will lead
X to become 0.
When editing only one coordinate, the other coordinate of the most recently track is
memorized. This helps getting straight movement lines.
EQ Assignment Modes
Briefly pressing the
EQ
button toggles between
EQ Multi Channel View
or
EQ Channel
Strip View
.
Multi Channel View
EQ Multi Channel View
allows you to edit one equalizer parameter for all
tracks:
Frequency
,
Gain
,
Q
or
EQ bypass
. The EQ “band” number, and parameter being
edited will be displayed for one second when switching to this mode.
•
The
Mode Display
will show
E1
to
E8
, dependent on the selected EQ band number.
•
The upper LCD row shows track names
•
Turning the
V-POT
s changes the EQ parameter
•
Pressing a
V-SELECT
sets the parameter to its default value
•
CURSOR UP/DOWN
switches to the next or previous EQ
band
.
•
CURSOR LEFT/RIGHT
switches to the next or previous EQ
parameter
. The selected
parameter will be displayed briefly in the upper LCD row.
•
Pressing a MUTE button while the SHIFT button is held down toggles the current EQ
band’s Bypass status.
•
When Flip Mode is enabled, the
MUTE
buttons display and edit the current EQ band’s
Bypass
status.