Specifications

38 Chapter 2 Logic Control—Details
Channel Strip View
EQ Channel Strip view allows you to edit all EQ parameters—in all bands—for the
selected track.
•
The Mode Display will show
EQ.
(for “EQ channel strip”).
• The upper LCD row shows the name of the track, “EQs”, the page number and total
number of pages—e. g. “Page 1/2”.
• V-POT/V-SELECT 1—edits the Frequency of odd-numbered EQs
• V-POT/V-SELECT 2—edits Gain of odd-numbered EQs
• V-POT/V-SELECT 3—edits Q of odd-numbered EQs
• V-POT/V-SELECT 4—edits Bypass of odd-numbered EQs
• V-POT/V-SELECT 5—edits the Frequency of equally-numbered EQs
• V-POT/V-SELECT 6—edits Gain of equally-numbered EQs
• V-POT/V-SELECT 7—edits Q of equally-numbered EQs
• V-POT/V-SELECT 8—edits Bypass of equally-numbered EQs
• CURSOR LEFT/RIGHT switches to the next or previous EQ band. The number of EQ
bands displayed on the LCD depends on the number of Logic Control (XT) units (two
EQ “bands” per unit) available.
Alternate Mode Options
Holding down the EQ button accesses a further sub-menu in the LCD:
• The Mode Display shows
E
_
or
E
_
., dependent on whether you were in EQ Multi
Channel or EQ Channel Strip view
• V-SELECT 1 or F1—switches to EQ Multi Channel View and selects Frequency
• V-SELECT 2 or F2—switches to EQ Multi Channel View and selects Gain
• V-SELECT 3 or F3—switches to EQ Multi Channel View and selects Q
• V-SELECT 4 or F4—switches to EQ Multi Channel View and selects Bypass
• V-SELECT 6 or F6—switches to EQ Channel Strip View
• V-SELECT 7 or F7—switches to Frequency/Gain Multi Channel View. In this mode you
can edit the Frequency and Gain parameters of a specific EQ band (1 to 8) for all
tracks.
• the Mode Display will show
F1
to
F8
, depending on the selected EQ band
• the upper LCD row shows track names
• the lower LCD row shows the Frequency of the selected EQ
• turning a V-POT changes EQ Frequency
• pressing a V-SELECT sets the EQ Frequency to its default value
• use the MUTE buttons to Bypass the EQ
• use the faders adjust the EQ Gain
• V-SELECT 8 or F8—switches to Frequency/Gain Channel Strip View. In this mode you can
edit the Frequency and Gain parameters for all EQ bands of the selected track. Each
pair of channel strips corresponds to one of the EQ bands.