Specifications

Chapter 2 Logic Control—Details 39
• the Mode Display will show
FG.
• V-POTs 1 to 8 control EQ band 1 to 8 Frequency
• MUTE buttons 1 to 8 control EQ band 1 to 8 Bypass
• FADERs 1 to 8 control EQ band 1 to 8 Gain
Note that in this mode, the faders form a frequency response curve, if the EQ bands
have ascending frequency values.
You can edit another track’s EQs by simply selecting the track, without leaving this view
mode.
Send Assignment Modes
Briefly pressing the SEND button toggles between Send Multi Channel or Send Channel
Strip View.
Multi Channel View
Send Multi Channel view allows you to edit one Send parameter for all
tracks: Destination, Level, Position and Mute. The Send “slot” number, and parameter
being edited will be displayed for one second when switching to this mode.
• The Mode Display will show
S1
to
S8
, depending on the selected Send “slot”.
• The upper LCD row shows track names
• Turning the V-POTs changes the Send parameter
• Pressing a V-SELECT confirms the pre-selected Send Destination and set the other send
parameters to their default.
• CURSOR UP/DOWN switches to the next or previous Send “slot”.
• CURSOR LEFT/RIGHT switches to the next or previous Send parameter. The selected
parameter will be displayed briefly in the upper LCD row.
• Pressing a MUTE button while the SHIFT button is held down toggles the current
Send’s Mute status.
• When Flip Mode is enabled, the MUTE buttons display and edit the current Send’s
Mute status.
Tip: Ensure that the ZOOM button isn’t active when using the CURSOR keys.