Specifications

Chapter 2 Logic Control—Details 41
•
The upper LCD row shows the name of the track, “Sends”, the page number and
total number of pages—e. g. “Page 1/4”
• V-POT/V-SELECT 1
to
8
—edits the displayed parameter
•
With the horizontal Cursor buttons you shift pages. The number of parameters
which are displayed simultaneously depends on the number of Logic Control XTs
you have.
• V-SELECT 7
or
F7
—switches to Destination/Level Multi Channel View :
In this mode you can control one Send “slot” for all tracks. Each channel strip
corresponds to the track shown in the upper LCD row.
•
the Mode Display will show
d1
to
d8
, depending on the selected Send
•
the upper LCD row shows track names
•
the lower LCD row shows the destination of the selected Send
•
turning a
V-POT
pre-selects the Send Destination
• pressing a V-SELECT confirms the pre-selected Send Destination
•
the
SOLO
buttons edit Send Position —
SOLO
LED on means “ Pre Fader ”
•
the
MUTE
buttons edit Send Mute
•
the faders edit Send Level
• V-SELECT 8
or
F8
—switches to Destination/Level Channel Strip View :
In this mode you can control all Send slots for the selected track. Each channel strip
corresponds to the Send number embossed below the LCD.
•
the Mode Display will show
dL.
• turning a V-POT pre-selects the corresponding Send Destination
•
pressing a
V-SELECT
confirms a preselected Send Destination
• the SOLO buttons edit Send Position—SOLO LED on means “Pre Fader”
• the MUTE buttons edit Send Mute
• the faders edit Send Gain
If one or more Sends are activated on multiple channels, you can switch between them
in the Channel Strip Views by simply pressing the SELECT button for the desired
channel.
Track 1 "Audio 1" Sends Page 1/2
Snd1Ds Snd2Ds Snd3Ds Snd4Ds Snd5Ds Snd6Ds Snd7Ds Snd7Ds