Specifications

42 Chapter 2 Logic Control—Details
Plug-In Assignment Modes
Pressing
PLUG-IN
toggles between Plug-in Multi Channel or Plug-in Channel Strip View .
Please note that there is one exception to this behavior: if you are in Instrument Edit
View , pressing this button switches to Plug-in Edit View .
Multi Channel View
This mode shows the plug-ins associated with a particular Insert “slot” for all channels.
•
The Mode Display will show
P1
to
P9
, or simply 10 to 16, dependent upon the selected
Plug-In Insert “slot” number. Note that if an Audio Instrument channel is selected, the
display will show
P1
to
P9
and 10 to 15
.
•
The upper LCD row shows track names.
•
The lower LCD row shows the currently selected plug-in for this insert slot. Muted
plug-ins are shown with an asterisk
*
which precedes the plug-in name.
•
Turning the
V-POT
s pre-selects a new plug-in. Until confirmed with the
V-SELECT
, the
plug-in name flashes.
•
Turning another
V-POT
will cancel any previous pre-selection and will start pre-
selection on the newly selected track.
•
Pressing a
V-SELECT
:
•
confirms/activates the pre-selected plug-in (assuming that you’ve made your pre-
selection by turning the
V-POT
)
• opens a plug-in editor window, if none are opened. If a plug in window is opened,
and link mode is enabled, the selection of another plug-in will replace the existing
plug-in shown.
•
switches to Plug-in Edit View
To remove a plug-in, pre-select the value of “
--
” (by turning the
V-POT
all the way
counterclockwise), and press the V-SELECT linked to the appropriate Insert slot. Logic
Control will not switch to Plug-In Edit view, and no Plug-In window will be launched. If
one was previously opened, it will be closed (if the “chain” icon is inactive).
• The CURSOR UP/DOWN buttons change the currently displayed Plug-in Insert slot (1 to
8).
• Pressing a V-SELECT while the SHIFT button is held down will mute/unmute the plug-
in.
• Pressing a MUTE button while the SHIFT button is held down toggles the will mute/
unmute the plug-in.