Specifications

Chapter 2 Logic Control—Details 45
Some plug-ins however don’t provide parameter names and/or values as text. In this
case the parameters are enumerated as “Control #1”, “Control #2” etc., and the values are
displayed as numbers between 0 and 1000.
Some VST plug-ins don’t allow to retrieve the value range; in this case the range 0 to
1000 is assumed. This is disturbing with switches, as they can’t be toggled with V-POTs
nor with V-SELECTs. In this case hold down OPTION and turn the V-POT.
Please contact the plug-in’s manufacturer in order to get a version which supports the
mentioned features.
Instrument Assignment Modes
Pressing the INSTRUMENT button switches to “Instrument Multi Channel” view.
Please note that when in Plug-In Edit view, pressing the INSTRUMENT button will switch
to Instrument Edit View.
If you can’t see the Audio Instrument channels, use the BANK or CHANNEL buttons in
the FADER BANKS zone, or switch to Global View by pressing the AUDIO INSTRUMENT
button. (This assumes that you have created at least one or more Audio Instrument
channels in the Environment Audio layer).
Multi Channel View
This mode shows the Instrument Insert “slot” (slot 1) for all channels.
• The Mode Display will show
In
• The upper LCD row shows track names
• The lower LCD row shows the currently selected Instrument. Muted Instrument
names are preceded by an asterisk *
• Turning the V-POTs pre-selects a new Instrument. Until activated, the pre-selected
Instrument name flashes.
• Turning another V-POT will cancel any previous pre-selection and will start pre-
selection on the newly selected track.
• Pressing a V-SELECT:
• activates the pre-selected Instrument plug-in (assuming that you’ve made your
pre-selection by turning the V-POT)
• opens a plug-in editor window, if none are opened. If a plug in window is opened,
and link mode is enabled, the selection of another Instrument plug-in will replace
the existing one.
• switches to Instrument Edit View
To remove an instrument plug-in, pre-select the value of “--” (by turning the V-POT all
the way counterclockwise), and press the V-SELECT. Logic Control will not switch to
Instrument Edit view, and no Plug-In window will be launched. If one was previously
opened, it will be closed (if the “chain” icon is inactive).