Specifications

Chapter 2 Logic Control—Details 47
Note that when shifting by bank, this always “quantizes” to integer banks. As an
example:
• your song has 19 tracks.
• Logic Control shows tracks 1 to 8
• BANK Right shifts to 9 to 16
• BANK Right shifts to 12 to 19
• BANK Left shifts back to 9 to 16, not to 4 to 11
This way, you always revert to the bank positions you expect, and are used to.
Channel Left/Right
As per the BANK buttons, but moves up or down in increments of a single channel.
Notes on Fader Bank Editing
When holding down the OPTION button, pressing the BANK LEFT or CHANNEL LEFT
button jumps to the first tracks, and pressing the BANK RIGHT or CHANNEL RIGHT button
jumps to the last tracks in the song—as an example in a 64 track song, tracks 1 to 8 or
tracks 57—64.
The Fader bank offset is memorized separately for Global views where one track type is
displayed (MIDI, Inputs, Audio Tracks, Instruments, Aux, Busses, Outputs+Master), and
there is also a separate fader bank offset for combination of multiple track types. This
feature allows you e.g. to scroll to audio tracks 2 to 9 in Global Audio Track view and to
scroll to instruments 5 to 12 in Global Instruments view. You can switch between the
views without losing the fader bank offset.
Flip
The FLIP button enables/disables the following “flip”, “swap” or “zero” modes:
• If the LED beside the FLIP button is off, flip/swap mode is off. The faders control
volume.
• Pressing the FLIP button enables “flip mode” (the LED goes on): in this mode, the
current assignment of the eight V-POTs are mirrored on the eight channel faders.
Pressing the FLIP button again disables flip mode.
Turning a V-POT in this mode will also move the corresponding fader.
• Pressing the FLIP button while the SHIFT button is held down enables “swap mode”
(the LED will flash): in this mode, the encoder assignments are swapped with the
fader assignments. Pressing SHIFT + FLIP again disables swap mode. As the LCD’s
lower row shows the current value of the encoders, it will show volumes in this
mode.
• Pressing FLIP without SHIFT held reverts to flip mode.