Specifications

50 Chapter 2 Logic Control—Details
• V-POT/V-SELECT 5 (label “TrkNam”)—sets track name display format
“Name”—track name only
“#:Name”—track number and name
This parameter can also be toggled with OPTION+NAME/VALUE
• V-POT/V-SELECT 6 (label “Lock”)—toggles Channel Strip View track lock
“Off”—as you are used to: selecting a track also switches the currently edited
Channel Strip track
“On”—the currently edited Channel Strip Track is not affected by selecting a track.
When you switch from On to Off, this also updates the Channel Strip track
To edit another track in Locked mode, first disable Lock, then select the desired track,
then re-enable Lock
• V-POT/V-SELECT 7 (label “Disply”)—toggles LCD display format
“Name”—upper line displays global info, lower line displays parameter names
“Value”—upper line displays parameter names, lower line displays parameter values
This parameter can also be toggled with NAME/VALUE.
• V-POT/V-SELECT 8 (label “Clock”)—toggles Clock display format
“Beats”—clock is displayed in format bars/measures/beats/ticks
“SMPTE”—clock is displayed in SMPTE format
This parameter can also be toggled with SMPTE/BEATS.
Control Surface Group Settings Mode can be left by pressing NAME/VALUE, or by
entering one of the Marker or Nudge modes.
SMPTE/Beats
To toggle between the two Time formats, repeatedly press the SMPTE/BEATS button in
the Display section at the top of the Logic Control—just below the SMPTE/BEATS LEDs.
For more information, see the Song Position/SMPTE Time Display section on page 23.