Specifications

52 Chapter 2 Logic Control—Details
The Global View Zone
The Global View mode is activated by pressing any of the GLOBAL VIEW buttons. When
any is activated, the green LED to the right of the GLOBAL VIEW button will illuminate.
Pressing multiple GLOBAL VIEW buttons simultaneously will display the objects of the
selected types. To do so:
Hold down any GLOBAL VIEW button, and add or remove other object types by
repeatedly pressing the other desired GLOBAL VIEW buttons. The display order of the
objects matches the order of these buttons on the front panel of the Logic Control.
As an example: to see the busses and the outputs, hold down BUSSES, and then press
OUTPUTS.
Further information on Global View is found in the Global View section on page 18.
Function Button Zone
There are three areas in this zone—Modifiers, Automation and Utilities.
Modifier Buttons
The four buttons in this area are similar to those found on your Mac OS or Windows
computer keyboard (however independent from them). Many of Logic’s functions
behave differently when one or more “modifier” key(s) is pressed, in conjunction with
another key or mouse click. This also applies to the Logic Control. All “modified” Logic
Control commands are covered in each function’s description.
A generic, and brief, description of each button follows:
• SHIFT—an alternate function/meaning for a button
• OPTION—the function applies to all objects. For relative value changes: the value is
set to the minimum or maximum, depending on whether you increase/decrease it.