Specifications

Chapter 2 Logic Control—Details 57
Large Marker Mode
When pressing the MARKER button while holding down SHIFT, the LCD will update to
display three options, assigned to the first three V-SELECTs.
• V-SELECT 1 to 5—display the first 5 Markers by name. Pressing a V-SELECT sets the
current song position to this Marker. When the current song position is inside a
marker, the lower line displays INSIDE, and the V-POT LED ring is on.
• V-SELECT 6—Cr w/o—Creates a marker without rounding to the nearest bar.
• V-SELECT 7—Create—Creates a marker rounded to the nearest bar.
• V-SELECT 8—Delete—Deletes the marker above the current SPL location.
To create or delete a marker at the current song position, simply press the appropriate
V-SELECT switch.
The creation or deletion of markers is best used in conjunction with the JOG/SCRUB
WHEEL
. Simply move to the desired song position by dialing with the wheel, and then
press the appropriate V-POT.
• For coarse placement, simply use the wheel to move the SPL.
• For fine placement, press the SCRUB button, and then use the wheel to place the SPL.
(Only appropriate if creating or deleting an un-rounded marker).
More information on the JOG/SCRUB WHEEL is found in The Jog/Scrub Wheel Zone section
on page 65.
Large Marker Mode is terminated by pressing MARKER.
Temporary Marker Mode
If you want to enter Marker Mode temporarily (to quickly perform a few marker
functions), hold down the MARKER button and press one or more of the above V-
SELECT
s: this will execute the marker function and leave marker mode as soon as you
release the MARKER button.
• When in this mode—with the MARKER button held—pressing the Function keys F1—
F8 “jumps” to the first 8 markers. As an example, to go to marker 3, press-hold
MARKER and press F3.
• To jump between markers, with (or without) the MARKER button held, simply press
the REWIND or FAST FWD buttons.