Specifications

60 Chapter 2 Logic Control—Details
Cycle View
Pressing the SHIFT + CYCLE buttons activates Cycle View mode:
• The Mode Display displays
Cy
• V-POT/V-SELECT 1—shows and edits the current Cycle status (off or on); you can also
use the CYCLE button
• V-SELECT 2—BySel— sets the current Cycle region by the selection made in the
Arrange window—i. e. the selected regions or sequences
• V-POT 3—Move— moves the current Cycle region by a bar with each “click” when
turning the V-POT
•
The display shows the left and right locators above V-POTs 5 and 7
• Pressing V-SELECT 5 picks up the current song position for the left locator
• Turning V-POT 5 changes the left locator in bars
• Turning V-POT 6 changes the left locator in beats (denominator steps).
• Pressing V-SELECT 7 picks up the current song position for the right locator
• Turning V-POT 7 changes the right locator in bars
• Turning V-POT 8 changes the right locator in beats (denominator steps)
To return to a regular Assignment mode, press one of the ASSIGNMENT buttons.
Drop
Activates/deactivates Drop-In mode.
To “jump” between drop-in regions:
1 Press the MARKER button, to activate it.
2 Press the
DROP button, and when active, press the REWIND or FAST FWD buttons.
Quickly Define a Drop Locator
To set the Drop In or Drop Out locator to the current song position, hold down
DROP
and press REWIND or FAST FWD. This also enables Drop.
So the fastest way to define a new Drop region is:
1 navigate to the Drop In locator with the
JOG/SCRUB WHEEL
2 press DROP + REWIND
3 navigate to the Drop Out locator with the JOG/SCRUB WHEEL
4 press DROP + FAST FWD