Specifications

Chapter 2 Logic Control—Details 61
Drop View
Pressing SHIFT + DROP buttons activates Drop View:
• The Mode Display shows dr
• V-POT/V-SELECT 1 shows and edits the current Drop status (off or on); you can also use
the DROP button
• V-POT 3—Move— moves the current Drop region by a bar with each “click” when
turning the V-POT
•
The display shows the Drop In and Drop Out locators above V-POTs 5 and 7
• Pressing V-SELECT 5 picks up the current song position for the Drop In locator
• Turning V-POT 5 changes the Drop In locator in bars
• Turning V-POT 6 changes the left locator in beats (denominator steps)
• Pressing V-SELECT 7 picks up the current song position for the Drop Out locator
• Turning V-POT 7 changes the Drop Out locator in bars
• Turning V-POT 8 changes the right locator in beats (denominator steps)
Changing a drop locator with Logic Control enables Drop mode.
To return to a regular Assignment mode, press one of the ASSIGNMENT buttons.
Replace
Activates/deactivates Replace mode.
Click
Enables/Disables MIDI (or computer) metronome click. There are independent click
settings for play and record. The click settings are enabled or disabled, dependent on
the current Record state (see the “MIDI/Monitor Metronome Click” key command)
Pressing SHIFT + CLICK buttons toggles both External Sync Mode and Transmit MMC.
Solo
The SOLO button behaves as per the Solo key command. Individual channels can be
soloed via the channel SOLO switches on each channel strip. Subsequent objects
(sequences or audio regions) can be selected and solo-ed along with the selected
channels. Each channel features an independent SOLO LED which illuminates when a
track is soloed. The RUDE SOLO LED—just to the right of the Position/Time Display—
also illuminates whenever any track is soloed.
Pressing SHIFT + SOLO buttons enables the Solo Lock mode.