Specifications

Chapter 2 Logic Control—Details 63
Stop
Stops all other Transport functions. Pressing the STOP button a second time will return
to the song start point, or the beginning of the nearest cycle region, if Cycle is active.
Repeated presses will toggle between the two.
Play
Plays from the current song position. If pressed repeatedly, it will jump to the
beginning of the nearest cycle region, if Cycle is active.
SHIFT + PLAY works as a Pause command.
Record
Activates recording on the selected MIDI, Audio or Audio Instrument track.
A special note for Audio tracks: When the first Audio track is armed by pressing the REC/
RDY
switch on the desired channel, a file save dialog will open on your computer
screen, waiting for you to enter a filename as per usual. The Logic Control LCD will
display There is a file select dialog on the screen and the Position/Time
Display will show
ALErt
. All LEDs will go off.
Once the file name has been entered—in Logic—the Logic Control will return all
controls to their status prior to invoking the REC/RDY command.
Once the “default” audio file name has been entered, you may freely select and “arm”
any Audio track, and then press the RECORD button. This will happen without the alert
messages and file save dialog appearing onscreen.
As a general working tip, you should also define a “default” audio file name, after saving
your autoload song under a different name. These should be the first steps when
creating any project.