Specifications

3 Mackie C4

You can use the C4 in an own control surface group (place its icon below Logic Control)

or combined with a Logic Control/XT (place the icon right of the existing icons). In the

latter case, the C4 adds 8 channels in Multi Channel views.

We recommend to use the C4 in an own control surface group. This allows you to edit

instruments and plug-ins and independently do mixing on the Logic Control or other

control surface.

V-POTs, V-SELECTs

The function depends on current view and optional overlay (see below).

The top row (row 1) consists of V-POT/V-SELECT 1 to 8.

Row 2 consists of V-POT/V-SELECT 9 to 16.

Row 3 consists of V-POT/V-SELECT 17 to 24.

The bottom row (row 4) consists of V-POT/V-SELECT 25 to 32.

V-POT/V-SELECT 1 to 8

While no overlay is active, V-POT/V-SELECT 1 to 8 (i.e. the top row) normally do the same

as on a Logic Control or Logic Control XT.

V-POT/V-SELECT 9 to 32

These V-POTs have additional functionality in many views.

In Multi Channel views, the V-POT/V-SELECTs of row 2, 3, and 4 usually edit the

parameter following the parameter edited on row 1.

Example: in Pan Multi Channel view, when row 1 edits Pan/Surround angle, row 2 edits

Surround Diversity, row 3 edits LFE and row 4 edits Surround Mode

In Channel Strip view, all four rows build a group of 32 parameters which can be edited.

In Plug-in and Instrument edit views, it can be split up into two groups (8/24, 16/16 or

24/8 parameters), see below.