Specifications

78 Chapter 3 Mackie C4
INSERT up/down selects the edited plug-in insert
BANK left/right shifts the edited parameters by 32. In Split mode, this applies to Split
Upper; when holding down SHIFT: applies to Split Lower
SINGLE left/right shifts the edited parameters by 1. In Split mode, this applies to Split
Upper; when holding down SHIFT: applies to Split Lower
Instrument Edit View
V-POT/V-SELECT 1 to 32 build a group of 32 parameters. Split is possible.
BANK left/right shifts the edited parameters by 32. In Split mode, this applies to Split
Upper; when holding down SHIFT: applies to Split Lower
SINGLE left/right shifts the edited parameters by 1. In Split mode, this applies to Split
Upper; when holding down SHIFT: applies to Split Lower
Buttons at Bottom
SPLIT
Toggles edit split between 4/0, 1/3, 2/2 and 3/1 rows. Edit Split alllows you to edit two
separate sections of a plug-in/instrument or even two different ones.
Split Edit is also possible across multiple C4 units. As an example with two units,
pressing the SPLIT button gets you following split modes:
• 1/7 (i.e. Split Upper is top line of first unit, Split Lower is bottom 3 lines of first unit
and all lines of second unit. LED 1/3 is lit),
• 2/6 (i.e. Split Upper is top 2 lines of first unit, Split Lower is bottom 2 lines of first unit
and all lines of second unit. LED 2/1 is on),
• 3/5 (LED 3/1 is on),
• 4/4 (all 3 LEDs are on),
• 5/3 (all 3 LEDs are on),
• 6/2 (all 3 LEDs are on) and
• 7/1 (all 3 LEDs are on).
LOCK
Toggles Track Lock. When enabled, selecting a track does not switch the currently
selected track
SPOT ERASE
Currently unassigned
MARKER
Toggles between Marker overlay (see below) and normal view
TRACK
Toggles between Track overlay (see below) and normal view