Specifications

80 Chapter 3 Mackie C4
SLOT UP/DOWN
Selects the currently edited EQ, Send or plug-in insert (see above).
Marker Overlay
While the MARKER button light is on, the Marker overlay is active.
A Logic Control in the same control surface group shows “MA” in the assignment
display.
V-SELECT 1 to 30 goes to Marker 1 to 30. The upper LCD line shows the marker name;
the lower line shows “INSIDE” when the song position is inside a marker.
V-SELECT 31 creates a new marker.
V-SELECT 32 deletes the current marker.
Track Overlay
While the TRACK button light is on, the Track overlay is active.
A Logic Control in the same control surface group shows “tr” in the assignment display.
V-SELECT 1 to 32 changes currently edited track. When a track is selected for Split Upper,
the lower LCD line shows “UPPER” for this track. For a track selected for Split Lower,
“LOWER” is shown.
To select a track for Split Upper, press the appropriate V-SELECT.
To select a track for Split Lower, press the V-SELECT while holding down SHIFT. A Logic
Control in the same control surface group shows “tL” in the assignment display.
BANK left/right shifts the fader bank by 32 tracks.
SINGLE left/right shifts the fader bank by 1 track.
Channel Strip Overlay
While the CHAN STRIP button light is on, the Channel Strip overlay is active.
A Logic Control in the same control surface group shows “CS.” in the assignment
display.
V-POT/V-SELECT row 1 edits EQ band 3 to 6 (i.e. the parametric bands’) frequency and
gain.
V-POT/V-SELECT row 2 switches to Plug-in insert 1 to 8 edit.