Specifications

4 Tascam FW-1884

Introduction

Logic supports the Tascam FW-1884 and FE-8 extension.

Version 1.10 also supports the SoftLCD application which displays information on track

names, parameter assignment and current value of the encoders. While one of the

automation mode buttons is held down, SoftLCD displays the tracks’ current

automation mode, and encoder edits it.

Alerts are displayed in SoftLCD. Select buttons allow to remote-control alert buttons.

Requirements

You need

• one or more FW-1884, optionally one or more FE-8

• Logic Pro 7 or Logic Express 7 or newer

Set Up

• Make sure that the FW-1884’s MIDI driver is installed. See the FW-1884

documentation for details

• Connect the FW-1884 using the FireWire cable

• The FW-1884 and FE-8 units are installed automatically.

• If you have multiple units, place their icons in the Setup window left to right so that

they have the same order as the physical units.

Operation

See the Assignment overview section.

The FE-8 extensions only have the Channel Strip section, so the other sections don’t

apply here. The FW-1884 ENCODERS section also applies to the FE-8 channel strips.