Specifications

Preface What Is Covered 9
Mackie Control Universal
The Mackie Control Universal must be switched to Logic Control mode. See the
documentation from Mackie on how to switch to Logic Control mode.
See sections “Logic Control—Basics” on page 13 and “Logic Control—Details” on
page 26.
Mackie HUI
Only available in Logic Pro, not in Logic Express.
The HUI plug-in has been tested with the original Mackie HUI. There are other control
surfaces not mentioned here which can emulate the HUI, however we haven’t tested
this and don’t support them.
See section “Mackie HUI” on page 87.
Radikal Technologies SAC-2.2
Only available in Logic Pro, not in Logic Express.
There is a dedicated plug-in for the SAC-2.2/2k’s native mode.
The Logic Control plug-in detects an SAC-2.2 reacting in Logic Control emulation and
ignores it, to avoid that the SAC-2.2 is installed twice.
See section “Radikal Technologies SAC-2K” on page 140.
Radikal Technologies SAC-2k
See section “Radikal Technologies SAC-2K” on page 140.
Roland SI-24
See section “Roland SI-24” on page 146.
Tascam FE-8
Extension unit for FW-1884.
See section “Tascam FW-1884” on page 82.
Tascam FW-1884
See section “Tascam FW-1884” on page 82.