Specifications

5 Mackie HUI

Requirements

You need

• a HUI or compatible product

• Logic Pro 7 or newer

Set Up

• Make sure that an XSKey with a Logic Pro 7 authorization is connected.

• Make sure that your HUI unit(s) are connected bidirectionally with the computer,

using a MIDI interface.

• Choose menu item Logic Pro > Control Surfaces > Setup…

• Choose menu item New > Install… in the Setup window’s local menu.

• For every HUI unit, select HUI in the Install window, choose Add, then set the

appropriate MIDI In and Out ports in the Setup window.

Other HUI-compatible Devices

If the unit emulates one HUI unit, proceed as if you have a HUI.

If you experience problems in the DSP Edit display, instead install the unit as a DM2000.

If the unit emulates more than one HUI, add an according number of additional devices

in the setup, similarly as for the Yamaha digital mixers. If the unit supports only one HUI

DSP edit section, choose HUI Channel Strips only as the model name for the additional

units. This ensures that scrolling in the DSP edit section scrolls by four parameters.

For the the assignment of the buttons, refer to section Assignment Overview chapter,

from page 92 and the device’s user manual.