Specifications

92 Chapter 5 Mackie HUI
Assignment Overview
A right-aligned modifier button below a button description means: while holding
down this modifier, the button has this alternate meaning.
ASSIGN Section
Control Assignment
SEND A assigns Send 1 Level to
V-POTs, and Send 1 to 4 Levels to DSP V-POTs. While held
down, the scribble strips show the current Send 1 destination assignment
SHIFT/ADD as above, but Send 6
SEND B assigns Send 2 Level to
V-POTs, and Send 1 to 4 Levels to DSP V-POTs. While held
down, the scribble strips show the current Send 2 destination assignment
SHIFT/ADD as above, but Send 7
SEND C assigns Send 3 Level to
V-POTs, and Send 1 to 4 Levels to DSP V-POTs. While held
down, the scribble strips show the current Send 3 destination assignment
SHIFT/ADD as above, but Send 8
SEND D assigns Send 4 Level to
V-POTs, and Send 1 to 4 Levels to DSP V-POTs. While held
down, the scribble strips show the current Send 4 destination assignment
SEND E assigns Send 5 Level to
V-POTs, and Send 5 to 8 Levels to DSP V-POTs. While held
down, the scribble strips show the current Send 5 destination assignment
PAN assigns Pan to
V-POTs; assigns selected track’s pan/surround parameters to DSP V-
POT
s
INPUT assigns Track Input to
V-POTs. While held down, the scribble strips show the current
Track Input assignment
OUTPUT assigns Track Output to
V-POTs. While held down, the scribble strips show the
current Track Output assignment
REC/RDY ALL Disable Record Ready on all tracks
BYPASS toggles the INSERT buttons between Insert Select and Insert Bypass mode
MUTE toggles the
V-SELECT buttons between Send Position and Send Mute mode
SHIFT toggles Flip mode
SELECT-ASSIGN displays the
V-POT assignment as follows:
Pan, Snd1 to Snd8, S1As to S8As, In, Out
SUSPEND —
DEFAULT toggles
V-SELECT buttons between normal behavior and setting default value
ASSIGN When
V-POTs display a Send level, switches them to Send Destination assignment
mode. Press
V-SELECT or ASSIGN again to confirm the assignment.