Specifications

Chapter 5 Mackie HUI 95
DSP EDIT/ASSIGN Section
Control Assignment
ASSIGN —
COMPARE toggles DSP display between modes “track name/parameter name” and “parameter
name/parameter value”
BYPASS toggles bypass of currently edited plug-in insert
DSP Select 1 to
4
Assignment Pan:
• DSP Select 1 sets Pan or Surround Angle to center
• DSP Select 2 sets Surround Diversity to center
• DSP Select 3 sets Surround LFE to center
• DSP Select 4 sets Surround Mode to center
Assignment Send:
• toggle Send 1 to 4 or 5 to 8 Mute
Plug-In Assign:
• confirm insert 1 to 4 or 5 to 8 plug-in selection, selects this insert and enters Plug-
In Edit mode
Plug-In Edit:
• sets value to default, or toggles switch
DSP
V-POTs Assignment Pan:
• DSP V-POT 1 controls Pan or Surround Angle
• DSP V-POT 2 controls Surround Diversity
• DSP V-POT 3 controls Surround LFE
• DSP V-POT 4 controls Surround Mode
Assignment Send:
• control Send 1 to 4 or 5 to 8 Level
Plug-In Assign:
• assigns insert 1 to 4 or 5 to 8 plug-in
Plug-In Edit:
• sets value to default
INSERT/PARAM toggles between Plug-in Assign and Plug-in Edit modes
SCROLL Plug-In Edit: shifts parameter display by the number of DSP
V-POTs in the control
surface group (usually four)
CMD/ALT/FINE Plug-In Edit: shifts parameter display by one