Specifications

Chapter 5 Mackie HUI 97
AUTO MODE Section
STATUS/GROUP Section
Control Assignment
READ sets selected track to automation mode “Read”. While held down, channel Strip
AUTO buttons set automation mode to Read
OPTION/ALL sets all tracks to automation mode “Read”
LATCH sets selected track to automation mode “Latch”. While held down, channel Strip
AUTO buttons set automation mode to “Latch”
OPTION/ALL sets all tracks to automation mode “Latch”
TRIM —
TOUCH sets selected track to automation mode “Touch”. While held down, channel Strip
AUTO buttons set automation mode to “Touch”
OPTION/ALL sets all tracks to automation mode “Touch”
WRITE sets selected track to automation mode “Write”. While held down, channel Strip
AUTO buttons set automation mode to “Write”
OPTION/ALL sets all tracks to automation mode “Write”
OFF sets selected track to automation mode “Off”. While held down, channel Strip AUTO
buttons set automation mode to “Off”
OPTION/ALL sets all tracks to automation mode “Off”
Control Assignment
AUTO while held down, the Scribble Strips display the tracks’ automation mode
MONITOR —
PHASE —
GROUP enters Group Edit mode:
• the upper line in the DSP edit section displays the currently edited group number
and name
• DSP Select buttons 1 to 4 toggle properties of the currently edited group, labelled
in the lower line
• When INSERT/PARAM is off, DSP Edit Scroll V-POT scrolls through the group
properties. Otherwise it selects the currently edited group
• the SELECT buttons toggle group membership of the track
SHIFT/ADD switches to Track View
CREATE creates a new group and enters Group Edit mode (see above)
SHIFT/ADD switches to Global View
SUSPEND toggles the Group Clutch
SHIFT/ADD switches to Extended Track View