User manual

AssignmentControl
—SEND MUTE
Mackie HUI: AUTO MODE Section
The following table outlines the automation controls and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the
button has an alternate use while the modifier is held down.
AssignmentModifierControl
Sets selected channel to Read automation mode.
While held down, pressing the channel strip AUTO
button sets the automation mode to Read.
READ
Sets all channels to Read automation mode.OPTION/ALL
Sets selected channel to Latch automation mode.
While held down, press the channel strip AUTO
button to set automation mode to Latch.
LATCH
Sets all channels to Latch automation mode.OPTION/ALL
—TRIM
Sets selected channel to Touch automation mode.
While held down, press the channel strip AUTO
button to set automation mode to Touch.
TOUCH
Sets all channels to Touch automation mode.OPTION/ALL
Sets selected channel to Write automation mode.
While held down, press the channel strip AUTO
button to set automation mode to Write.
WRITE
Sets all channels to Write automation mode.OPTION/ALL
Sets selected channel to Off automation mode.
While held down, press the channel strip AUTO
button to set automation mode to Off.
OFF
Sets all channels to Off automation mode.OPTION/ALL
Mackie HUI: STATUS/GROUP Section
The following table outlines the status/group controls and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the
button has an alternate use while the modifier is held down.
AssignmentModifierControl
While held down, the scribble strips display the
automation mode of all channels.
AUTO
—MONITOR
Switches to Single view.PHASE—SHIFT
183Chapter 13 Mackie HUI