User manual

• Row 4 mutes/unmutes sends 1 to 8.
• TRACK L and TRACK R switch to the previous or next channel.
To access Send Channel view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels are shown on the C4 displays.
2 Press V-Select 28 (labeled Sends).
Mackie C4: Effect Assign Mixer View Mode
In Effect Assign Mixer view, the C4 displays the first four Insert slots of the eight selected
channels.
• Turn a V-Pot to switch between effects. (This action lets you browse through the effects
listed in the Effect menu, shown in Logic Express mixer channels.)
• Press the respective V-Select to insert the chosen effect. This activates Effect Edit view,
where you can directly edit effect parameters. See Mackie C4: Effect Edit View Mode
for more information.
• The SLOT UP/SLOT DOWN buttons switch between Insert slots.
• TRACK L and TRACK R shift the fader bank by the number of channel strips in the control
surface group.
• Holding down SHIFT and pressing a V-Select switches the bypass state of the respective
Insert slot. Bypassed effects are denoted by an asterisk (*) that precedes the effect
name.
To access Effect Assign Mixer view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels are shown on the C4 displays.
2 Press V-Select 21 (labeled PlugIn Mixer).
Mackie C4: Effect Edit View Mode
In Effect Edit view:
• V-Pots 1 to 32 constitute a group of 32 parameters. Splitting is possible (see SPLIT
Button).
• The SLOT UP/SLOT DOWN buttons select the Insert slot.
• BANK Left/BANK Right shifts the edited parameters by one page.
• In Split mode, the SLOT and BANK button behaviors apply to Split Upper.
• When holding down SHIFT, the SLOT and BANK button behaviors apply to Split Lower.
• SINGLE Left/SINGLE Right shifts the edited parameters by 1.
• In Split mode, the SINGLE button behaviors apply to Split Upper.
193Chapter 14 Mackie C4