User manual

Yamaha DM1000: FADER MODE Section
The following table outlines the FADER MODE control and its assignment:
AssignmentControl
Enables/disables Flip mode.FADER/AUX
Yamaha DM1000: Basic LCD Functions
The following table outlines the LCD controls and their assignments:
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate function while the modifier is held down. Modifier
buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
AssignmentModifierControl
Plug-in Edit mode: shifts the parameter display to
show the next/previous page of parameter
controls (usually four) for the selected plug-in.
Left & Right Tab Scroll
buttons
Plug-in Edit mode: shifts the parameter display
up/down by one parameter for the selected
plug-in.
*DAW ALT/FINE
Yamaha DM1000: LCD Modal Display Functions
The LCD display contents reflect the page selected with the F2, F3, and F4 buttons.
LCD Top Section
The following elements are common across all pages in the LCD.
AssignmentDisplay
Active if counter is displaying SMPTE time codeTIME CODE
Active if counter is displaying bars/beats/divisions/ticksBEATS
Displays either SMPTE time code or bars/beats/divisions/ticks.Counter
Displays the encoder assignment as follows: Pan, Snd1 to Snd8,
S1As to S8As, In, Out.
SELECT ASSIGN
Insert Display Mode
Press the F2 button to select Insert Display mode. In this mode, the LCD displays
parameters, allowing you to edit effects. This mode also allows you to switch between
different Insert slots, enabling each effect to be edited.
AssignmentControl
Switches the display between “track name/parameter name” and
“parameter name/parameter value” modes.
COMPARE
Switches the bypass state of plug-in currently being edited.BYPASS
263Chapter 23 Yamaha DM1000