User manual

AssignmentControl
Switches between Plug-in Assign and Plug-in Edit modes.INSERT/PARAM
Pan Assignment mode:
• Parameter control 1 button centers pan angle.
Send Assignment mode:
• Enables/disables Sends 1 to 4 or 5 to 8.
Plug-in Assignment mode:
• Confirms the plug-in selection for Insert slots 1 to 4 or 5 to 8, and
enters Plug-in Edit mode for the selected Insert slot.
Plug-In Edit mode:
• Sets value to default, or switches buttons with two states.
Selecting virtual encoders 1 to 4
(Use cursor keys, and then press
ENTER button.)
Pan Assignment mode:
• Parameter control 1 edits pan angle.
Send Assignment mode:
• Controls the Send level of Sends 1 to 4 or 5 to 8.
Plug-in Assignment mode:
• Chooses Insert slot 1 to 4 or 5 to 8.
Plug-in Edit mode:
• Sets value.
Moving virtual encoders 1 to 4
(Use cursor keys, and then rotate
parameter wheel.)
Channel Display Mode
Press the F3 button to select Channel Display mode. In this mode, the parameter controls,
such as pan and send level, for channel strips 1 to 16 are displayed.
AssignmentControl
When Send 1 to 8 is selected: edits Send pre/post fader position,
enables or disables Send mute, or sets Send level to default value.
Send, Input, or Output Assignment mode: confirms selection.
Selecting virtual encoders 1 to 4
(Use cursor keys, and then press
ENTER button.)
Adjusts parameter selected in the ENCODER MODE and AUX SELECT
sections.
Moving virtual encoders 1 to 4
(Use cursor keys, and then rotate
parameter wheel.)
Meter Display Mode
Press the F4 button to select Meter Display mode. In this mode, the level meters for
channel strips 1 to 16 are displayed.
AssignmentControl
Display momentary and peak level.Level Meters
Yamaha DM1000: Data Entry Section
The following table outlines the data entry controls and their assignments:
264 Chapter 23 Yamaha DM1000