User manual

Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate function while the modifier is held down. Modifier
buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
AssignmentModifierControl
Default: adjusts the value of the currently selected
parameter.
Parameter wheel
Switches the parameter wheel to Shuttle mode.* DAW SHUTTLE
Switches the parameter wheel to Scrub mode.* DAW SCRUB
Default: exits folder.
In Go to Marker dialog: cancels dialog.
[DEC] button
Opens or closes the Audio Bin tab in the Media
area.
* DAW ALT/FINE
Enters the selected folder.[INC] button
Yamaha DM1000: Channel Strips
The following table outlines the channel strip controls and their assignments:
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate function while the modifier is held down. Modifier
buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
AssignmentModifierControl
Adjusts parameter selected in the ENCODER MODE
and AUX SELECT sections.
Encoder
Pan selected: sets pan to center position.
Send 1 to 8 selected: edits Send pre/post position,
activates/deactivates Send mute, or sets Send level
to default value.
Send Assign, Input, or Output selected: confirms
selection.
Encoder Select button
If AUTO off:
• AUX 8 off: selects channel strip.
• AUX 8 on: selects channel strip for insert
assignment.
If AUTO on:
• Cycles through automation modes. With an
automation mode button held down, sets this
automation mode.
SEL
Resets the volume level.*DAW SHIFT/ADD
Enables/disables the Solo button.SOLO
265Chapter 23 Yamaha DM1000