User manual

AssignmentModifierControl
Disables Solo button of all channel strips.*DAW OPTION/ALL
Enables/disables the Mute button.ON
Unmutes all channel strips.*DAW OPTION/ALL
Adjusts volume, or duplicates encoder assignment
in Flip mode.
Fader
Yamaha DM1000: Stereo Channel Strip
The following table outlines the stereo channel strip control and its assignment:
AssignmentControl
Switches channel strip SEL buttons between channel and insert
selection duties.
AUTO
Yamaha DM1000: USER-DEFINED KEYS Section
These keys can be assigned to the following functions:
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate function while the modifier is held down. Modifier
buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
AssignmentModifierControl
Opens or closes the Audio Bin tab in the Media
area.
DAW WIN STATUS
Enables/disables the Record Enable button of the
specified channel strip.
DAW REC/RDY 1 to 16
Opens or closes the Transport bar window.DAW WIN TRANSPORT
Shifts channel strips by one bank to the left.DAW BANK –
Shifts channel strips by one bank to the right.DAW BANK +
Enables a second function/use for some buttons.DAW SHIFT/ADD
While held down, Value Change mode is set to
Full. Turning the encoder to the right sets the
maximum value. Turning it to the left sets the
minimum value. The encoder also stops at its
default value. Also see description of other
buttons.
DAW OPTION/ALL
266 Chapter 23 Yamaha DM1000