User manual

AssignmentModifierControl
Enters Group Edit mode:
• When a channel strip group is selected, channel
strip membership is indicated by a lit SEL
button. Use this button to enable/disable the
channel strip’s group membership.
• Virtual encoders 1 to 4 display properties of the
currently selected group.
• Virtual encoder buttons 1 to 4 enable/disable
properties of the currently selected group.
• When INSERT/PARAM is set to PARAM, the left
and right Tab Scroll buttons scroll through the
group properties. When set to INSERT, the
buttons scroll through the groups for editing.
DAW GROUP STATUS
Switches the Mixer to the Arrange view, displaying
all channel strips that correspond to tracks used
in the Arrange area, along with their signal flow.
The channel strips on your DM1000 device will
also reflect the ‘Arrange’ Channel Strip View mode.
*DAW SHIFT/ADD
Enables/disables the Group Clutch.DAW SUSPEND GRP
Switches the Mixer to the Arrange view, displaying
all channel strips that correspond to tracks used
in the Arrange area, along with their signal flow.
The channel strips on your DM1000 device will
reflect the ‘Tracks’ Channel Strip View mode, and
not the ‘Arrange.’
*DAW SHIFT/ADD
Creates a new group and enters Group Edit mode
(see above).
DAW CREATE GROUP
Switches the Mixer to the All view, displaying all
channel strips that exist in your project.
The channel strips on your DM1000 device will
also reflect the ‘All’ Channel Strip View mode.
*DAW SHIFT/ADD
Switches between the Arrange window and the
Mixer.
DAW WIN MIX/EDIT
Shifts channel strips by one channel strip to the
left.
DAW CHANNEL -
Shifts channel strips by one channel strip to the
right.
DAW CHANNEL+
While held down, all groups are disabled.DAW CTRL/CLUTCH
While held down, Value Change mode is set to
Fine: value changes work at maximum resolution.
Also see description of other buttons.
DAW ALT/FINE
—DAW MONI STATUS
Performs an Undo of the last editing operation.DAW UNDO
267Chapter 23 Yamaha DM1000