User Manual

104
SPECTRALIS 2
„Reso“ - Resolution
The resolution of the notes can be set from 192th up to 12 whole notes.
„Oct“ - Octaves
The octaves function repeats an arpeggiator motif in different octaves.
You can choose values between 1 and 4 octaves.
[Page-Up] selects the second menupage:
2/3 Arpeggiator Settings
Gate:25 Velo:asPl Rep:1
„Gate“ - Gatetime
This parameter controls the duration of the resulting notes.
„Velo“ - Velocity
This parameter allows to control the velocity of the notes, the arpeggiator
generates. The [Velo]-encoder button toggles between an adjustable
velocity level (range from 1-127) and the original note velocities one
has played on the keyboard (AsPlayed). If „AsPl“ is selected, rotating
the encoder does nothing. But if one presses the encoderbutton, the display
will change from „AsPl“ to a value between 1-127 representing the
velocity level of the generated notes. Now the encoder controls the
velocity level.
„Rep“ - Repeat
This function repeats the single notes of an arpeggiator motif between
one and four times.
3/3 Arpeggiator Settings
Hold:Off Len:4
„Hold“
This function keeps all notes in the arpeggiator memory and plays them
until you release all keys and press another chord or note. By pressing
down and holding one key one can add more and more notes by touching
them one after another. In combination with the direction setting
„asPlayed“ one can define complete melodies. If one wants to delete one
of the notes from the arpeggiator motif one can press down the shift
button and play this note. The arpeggiator will delete that note from the
arpeggiator motif then.
The arpeggiator will not stop even if you release all keys. But don’t
worry. Just hit the stop button to erase the arpeggiator motif and stop the
arpeggiator.
The arpeggiator