User Manual

111
SPECTRALIS 2
1/2:VCO1 Waveform Modifiers
ˆShape:255ˆTlm:0 Sync:0
„Shape“ selects the waveform of the selected oscillator.
„TLM“ changes the Timelinearity depth.
„Sync“ is only available for oscillator 1 and syncs to oscillator 2
Pressing the „Shape“ encoderbutton opens the menu for further wavetable
modulation settings.
Pressing the „TLM“ encoderbutton opens the menu for further
Timelinearity modulation settings.
^ VCO1 Wavetable Modulation
Src1:None Dph1:0 Src2:None Dph2:0
Two different modulators can be assigned as modulation sources for low
frequency wavetable modulations.
„Src1“ and „Src2“ select the modulation source. The following list shows
the available modulation sources. They are available in other modulation
menus of the hybrid synth as well.MLFO1-4 (Master LFO1-4), MMLFO
(Multimode Filter LFO), LPLFO(Lowpass Filter Modulation), VLFO1-
4 (Oscillator Vibrato LFOs), Vel (Velocity), Aft (Aftertouch), Wheel
(Modulation wheel), Brth (Breath control), Pitch (pitchbender)
„Dph1“ and „Dph2“ (Depth) controls the depth of the wavetable
modulation for the selected modulation source.
^ VCO1 Time Linearity Modulation (PWM)
Src1:None Dph1:0 Src2:None Dph2:0
Two different modulators can be assigned as Timelinearity modulation
sources. Please refer to the modulation sources listing in the wavetable
modulation menu description above.
„Dph1“ and „Dph2“ (Depth) control the depth of the timelinearity
modulation.
^ 2/2:VCO1 Phase & FM Modulation
03PM:0 O4PM:0 O3LFM:0 04LFM:0
The second page of the Waveform modifiers submenu controls the Phase-
modulation and FM Modulation depth.
„O3PM“ - Phasemodulation with oscillator 3 as the modulation source.
„04PM“ - Phasemodulation with oscillator 4 as the modulation source.
„03LFM“ - linear FM with oscillator 3 as the modulator.
„04LFM“ - linear FM with oscillator 3 as the modulator.
2/27:VCO Volume Envelope Macro
ˆOsc1:0 ˆOsc2:0 ˆOsc3:0 ˆOsc4:0
Hybrid Synthesizer reference: Oscillator wave menu