User Manual

113
SPECTRALIS 2
6/27:VCO FX1 Send
Osc1:0 Osc2:0 Osc3:0 Osc4:0
„Osc1“ - „Osc4“ (Oscillator FX1 Send Level) Controls the oscillators
send level for the FX1 processor.
7/27:VCO FX2 Send
Osc1:0 Osc2:0 Osc3:0 Osc4:0
„Osc1“ - „Osc4“ (Oscillator FX2 Send Level) Controls the oscillators
send level for the FX2 processor.
8/27:VCO Direct Output Volume
Osc1:0 Osc2:0 Osc3:0 Osc4:0
„Osc1“ - „Osc4“ (Oscillator direct output level) Controls the oscillators
direct level for the hybrid synth output.
9/27:VCO Direct Output Pan position
Pan:<C> Pan:<C> Pan:<C> Pan:<C>
„Pan“ controls the stereo position for the oscillator direct output.
10/27:VCO Volume Envelope Bypass
Osc1:0 Osc2:0 Osc3:0 Osc4:0
„Osc1“ - „Osc4“ allows for bypassing the enveloped amplifier of
oscillator 1-4 with adjustable level.
11/27:VCO1 Time Linearity Modulation
TlmM:0 TlmF:VCO4 WaveM:0 WaveF:VCO4
The menu pages 11/27 - 14/27 present audio frequency Time Linearity and
waveform modulation for oscillators 1-4.
„TLM“ - sets the depth of the audio frequency time linearity modulation.
Creates harsh digital distortion and aliasing on high frequency settings
and acts therefor as a good source for lofi experiments.
„TLMF“ - Selects the modulation source for the Timelinearity
modulation. All four oscillators can be selected.
„WaveF“ - Sets the depth of the audio range wavetable modulation.
„WaveF“ - Selects the modulation source for the wavetable modulation.
All four oscillators can be selected.
Menu pages 15/27 - 18/27 offer oscillator synchronisation for oscillator 1,
Hybrid Synthesizer reference: Oscillator wave menu