User Manual

114
SPECTRALIS 2
ringmodulation for oscillator 4 and sets the keyboard frequency scaling and
the glide time.
TIP! - The glide Time can also be adjusted for all oscillators at once in the
glide time menu (press the Glide-encoderbutton)
15/27:VCO1 Sync, Glide & Keyb. Scaling
Sync:0 Glide:0 Centr:A3 Scale:12
„Sync“ - Sync controls the oscillator synchronisation between oscillator
2 and 1. The second oscillator synchronizes the first oscillator. The Sync
value controls how close the waveform of oscillator 1 must stay to the
zero position in order to get synced. At a value of 255 the oscillator syncs
always, if the oscillator 2 crosses the zero position. At values below 255
the oscillator 1 gets only synced, if the waveform is close to the zero
line.
„Glide“ - Glide sets the glide time of the oscillators pitch.
„Centr“ - Center defines the tone, where the pitch is not affected by the
keyboard scaling
„Scale“ - Sets the keyboard pitch scaling. „12“ is the default value and
gives 12 halftones per octave on the keyboard.
16/27:VCO2 Glide & Keyboard Scaling
Glide:0 Centr:A3 Scale:12
17/27:VCO3 Glide & Keyboard Scaling
Glide:0 Centr:A3 Scale:12
The same parameters like at page 15/27 but without the Sync parameter as
only oscillator 1 can be synchronised.
18/27:VCO4 Ringmd, Glide & Keyb. Scaling
Ring:OFF Glide:0 Centr:A3 Scale:12
The same parameters like at page 15/27 but instead of sync this page has the
„Ring“ parameter.
„Ring“ - Ringmodulation On/Off activates the ringmodulation of
oscillator 3 and 4. The signal of the ringmodulator replaces the output of
oscillator 4 when activated.
Pages 19/27 - 22/27 controls the bitcrusher, phase startpoint, the
Modulationwheel dependent FM depth from oscillator 4 and the pitchbend
range. The pitchbend range can be edited at page 4 of the oscillator pitch menu
for all oscillators at once.
Hybrid Synthesizer reference: Oscillator wave menu