User Manual

116
SPECTRALIS 2
„OscX“ - (Oscillator Level scaling depth) controls the depth of the
keyboard level scaling.
Pushing one of the display encoder buttons opens a menu page with further
level scaling parameters:
^ 1/4:VCO1 Keyboard Level Scaling
KsLw:C-3 KsMd:C3 KsHi:G8 KsSc:127
„KsLw“ - (Keyboard Level scaling lowest note) sets the lowest note
affected by the level scaling curve
„KsMd“ - (Keyboard Level Scaling mid note) sets the note, where the
scaling curve has no effect. The curve will changes volumes above and
under this note.
„KsHi“ - (Keyboard level scaling highest note) sets the highest note
affected by the level scaling curve.
„KsSc“ - (Keyboard Level scale setting) controls the angle of the level
scaling curve. Values above 0 will increase the volume above the
Keyboard level scaling mid note and the highest note. Values below 0
will decrease the volume below the keyboard level scaling mid note and
above the lowest note.
26/27:VCO Velocity Level Scaling
Osc1:0 Osc2:0 Osc3:0 Osc4:0
The velocity level scaling changes the volume of oscillators dependent on the
keyboard velocity played.
„OscX“ - controls the depth of the velocity dependency of oscillator 1 -
4. This parameter is very essential for typical frequency modulation and
phase modulation sounds.
27/27:VCO Phase startpoint (0=freerun)
Osc1:0 Osc2:0 Osc3:0 Osc4:0
This is an additional edit page for setting the phase startpoint of all oscillators
in one menupage. Refer to page 19/27
4.2.2 VCO Pitch Menu
Turning the Oscillator Detune first sets the oscillator frequencies to equal pitch
and and adds detuning when turning further. At the end of the range the
oscillators get detuned by musical intervalls.
By holding [SHIFT] while turning the encoder, another function will be
accessed. Now the encoder shifts the pitch of all oscillators at once in halftone
steps. If glide is selected for oscillators, the pitch shift works continuously.
Hybrid Synthesizer reference: Oscillator pitch menu