User Manual

119
SPECTRALIS 2
4.2.3 VCO Glide Menu
Turning the glide-encoder sets the glide time for oscillator 1. Holding shift
while turning the Glide-encoder changes the glide time for all oscillators at
once.
Pressing the Glide-Encoder opens the oscillator glide menu.
VCO 1-4 Glide Speed (0=no Glide)
Osc1:0 Osc2:0 Osc3:0 Osc4:0
„Osc1“ - „Osc4“ - Sets the individual glide times for VCO 1 - 4
4.3 The Master LFO section
4.3.1 LFO Wave Menu
The LFO WAVE encoder controls the waveform of all master LFOs at once.
Holding [Shift] while turning the encoder assigns a modulation wheel
dependency to the waveform selection. Positive values will allow to change
the waveform with the modulation wheel.
Pushing the LFO Wave encoder opens the LFO-Wave menu.
Master LFO Wave Menu
^MLFO1:0 ^MLFO2:0 ^MLFO3:0 ^MLFO4:0
„MLFOx“ - (Master LFO 1-4 waveform) The waveform selection of
the LFOs gives a smooth transition from sine (0) over triangle (64) over
sawtooth (128) over rectangle (196) to random (255).
Pressing any of the display encoders opens the submenu for setting the startpoint
phase of the LFO wave.
^ 1/4:Master LFO 1 Waveform Control
LWve:0 LPhs:0
„LWve“ - (LFO WAVE) again the waveform selection.
„LPhs“ - (Phasestartpoint) The phase position of the waveform when
the note gets triggered. „0“ selects freerunning mode. Every notetrigger
starts the LFO then at another phase position. Values above „0“ will set a
fixed startpoint for the LFO wave.
4.3.2 LFO Depth Menu
Turning the LFO-DEPTH encoder changes the LFO-DEPTH of all Master LFOs
at once.
Holding [Shift] while turning the LFO DEPTH encoder assigns a modulation
wheel dependency to the LFO depth.
Hybrid Synthesizer reference: Oscillator glide menu