User Manual

120
SPECTRALIS 2
Pushing the LFO Depth encoder button opens the Master LFO Depth menu.
Master LFO Modulation Depth
^MLFO1:127^MLFO2:127^MLFO3:127^MLFO4:127
„MLFO1“ - „MLFO4“ control the LFO modulation depth. Targets for
the LFO modulations have independent modulation depths. The resulting
modulation depth is the product of the LFO depth and the target
modulation depth. If a LFO is not assigned to any target, the modulation
will not become audible. Possible modulation targets are:
Oscillator Pitch, Oscillator Wavetable modulation, Oscillator TLM, 24dB
Lowpass cutoff frequency and resonance, Multimode Filter cutoff
frequency and resonance. Each modulation target can be controlled by
up to two Master LFOs at once.
Pressing any of the display encoders in the LFO Depth menu, opens the
submenu for the LFO depth modulation.
^ 1/4:Master LFO1 Depth Control
LDpt:127 ^LEDp:0
„LPpt“ - (LFO Depth) just added the depth parameter again to control
the envelope dependent depth and the basic depth in one page.
„LEDp“ - (LFO Envelope Depth) controls the strength of the enveloped
depth control.
Pushing the „LEDp“ encoder button opens the envelope edit page:
^ 1/4:LFO1 Depth Control Envelope
LEDl:0 LEAt:0 LERl:0 LEDp:0
„LEDl“ - (LFO Envelope delay) sets the time between the note trigger
and the start of the modulation depth envelope.
„LEAt“ - (LFO Envelope Attack time) sets the attack time of the
modulation depth envelope.
„LERl“ - (LFO envelope Release time) sets the Release time of the LFO
depth envelope.
„LEDp“ - (LFO Envelope Depth) controls the strength of the enveloped
depth control.
Hybrid Synthesizer reference: Master LFO