User Manual

128
SPECTRALIS 2
^ 1/4:Multimode: Volume Envelope Page2
Hld:0 MMBP:3
^ 2/4:24dB Lowpass: Volume Envelope Page2
Hld:0 LPBP:3
^ 3/4:Multimode: Cutoff Envelope Page2
Hld:0
^ 4/4:24dB Lowpass: Cutoff Envelope Page2
Hld:0
With the page buttons one can navigate through the submenus of all 4
filter envelope generators. The two volume envelope submenus have one
additional parameter („MMBP“ and „LPBP“). They control the envelope
bypass function that makes the filter output volume independent from
the volume envelope. In all situations, where one wants to feed a signal
through the filter without triggering the soundengine, the bypass function
should be set to a value above zero.
„Hld“ - (Hold Time) controls the hold time between the attack
and decay phase of the envelope.
„LPBP“ or „MMBP“ (24dB Lowpass- and Multimode Filter
Envelope Bypass) control the direct output signal of the filters.
2/4:24dB Lowpass: Volume Envelope Page1
Att:74 ^Dcy:127 Stn:160 Rls:127
„Att“ - (Attack Time) controls the attack time of the 24dB lowpass filter
volume envelope.
„Dcy“ - (Decay Time) controls the decay time of the 24dB lowpass filter
volume envelope.
„Stn“ - (Sustain Level) controls the sustain level of the 24dB lowpass
filter volume envelope.
„Rls“ - (Release Time) controls the release time of the 24dB lowpass
filter volume envelope.
TIP: All volume envelopes (those for oscillators, the noise source, the
analog filters and the fixed filterbank) can additionally be found in one
separate menu by pressing the EG-Balance encoder button in the VCA
section.
Hybrid Synthesizer reference: Filter envelopes